HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
Add to Cart
Plug Socket Test Equipment Apparatus To Verify The Fixation Of Pins In The Body Of The Plug
Standard:
IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 24.10 and figure 30
Application:
This device is use to verify the fixation of pins in the body of the plug.Plug Socket Test Equipment
Test sample: Plug pins.
Feature:
In according with standard requirements, to verify the fixation of pins in the body of the plug
Parameters:
| Station | 1 station. Plug Socket Test Equipment |
| Weights | 4N, 20N, 30N for ordinary hole, one in each; 50N, 20N with hook, one in each |
| Gauges | provide 6A plug gauge, 10A plug gauge, 16A plug gauge, one each；For flat pins, hole size equal to pin size plus 4±0.44mm；For round pins, hole size equal to pin diameter plus 6±0.5mm. (Customizable) |
| Clamp unit | plug pin clamp unit, 1 set |
To be test within a heating cabinet at a temperature of (70 ± 2) °C
Table 16 – Maximum and minimum withdrawal force for plugs and socket-outlets
| Ratings of the accessory | Number of the poles of the accessory | Withdrawal force N | ||
| Multi-pin gauge maximum | Multi-pin gauge maximum | Single-pin gauge maximuma | ||
| Up to and including 13 A | 2 | 40 | 1.5 | 17 |
| 3 | 50 | |||
| 5 | 70 | |||
| Up to and including 13 A | 2 | 50 | 2.0 | 25 |
| 3 | 54 | |||
| More than 3 | 70 | |||
| Above 16 A up to and including 32 A | 2 | 80 | 3.0 | 27 |
| 3 | 80 | |||
| More than 3 | 100 | |||
| a These withdrawal forces are only for testing the resilient earthing contact assembly of a plug. | ||||
