HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
Add to Cart
IEC 60884 Figure 21 Plug Socket Test Equipment Power Cord Flexing Tester
Standard:
IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 23.4 and figure 21
Application:
This device is used for test the flexing properties of non-rewirable plugs (terminals) and non-rewirable portable socket-outlets, check the fatigue strength of the power cable and jacket. Plug Socket Test Equipment
Test sample:
Non-rewirable plugs and non-rewirable portable socket-outlets.Plug Socket Test Equipment
Feature:
The speed reducing motor controls the crank sliding block structure to do the reciprocating motion, the left and right flexing angles are adjusted by manual scale, and angle automatic adjustment touch screen model can be customized.
Tester will automatic shutdown when preset test times completed.
Parameters:
| Power supply | AC220V 50Hz |
| Flexing angle | Swivel angle on either side for 45° , 60°, or 90°. Adjustable |
| Flexing rate | 10~60rpm (frequency conversion), the default 60 times /min |
| Weights | 20N, 10N. 6 each(UL 113g and 284g weights can be customized) |
| Test station | 6 stations, with 6 sets of clamp device |
| Test times | one general counter, 6 individual counters. 0~999999 preset |
| Mechanical theory | The crank block on the reduction gearbox is driven by the electric motor to do the reciprocating action |
| Cord broken indicator | Φ25 red indicating light |
| Dimension | L1000mm*W500mm*H1100 mm |
