HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
Add to Cart
Household Appliance Test Equipment Free Fall Repeated 500mm For Mechanical Strength Test
Standard:
IEC 60335-1 ‘Household and similar electrical appliances – Safety – Part 1: General requirements’ clause Annex B 21.101;
IEC60068-2-31 ‘Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens’.
Application:
It is used to check the drop resistance of electrical accessories, to assess the effects on a specimen of simple standard tests intended to be representative of the fall likely to be experienced during rough handling, or to demonstrate a minimum degree of robustness, for the purpose of assessing safety requirements. Household Appliance Test Equipment
Standard description:
The specimen shall be placed in the test apparatus and subjected to the prescribed number of falls. If the specimen is normally attached to a cable, the relevant specification shall state the type of cable to be used. When the specimen is normally attached to a cable, a free length of 100 mm of cable shall remain connected to the specimen during the test, unless otherwise prescribed in the relevant specification.
Parameter:
| Model | HC9922 |
| Rotate speed | 5rpm |
| Falls rate | 10 cycles per min |
| Material | Sideways 1.5mm high-quality steel plate, upper and lower are 3mm steel pads in the 10-19mm woods, and oblique part slide surface is plastic laminate, with triangle rubber pad |
| Number of falls | 0~9999 times |
| Height of the falls | 500mm. Household Appliance Test Equipment |
| Barrel number | Single |
| Dimension | W*D*H=630mm x 600mm x 1250mm |
| Chute Length | 275mm |
| Application | Plug and socket and similar electrical accessories |
| Power supply | AC220V, 50Hz |
